夾緊氣缸
小型夾緊缸 CKZM16-X2800/X2900
-
?體積小 寬20mm，重量輕 質量250g
?最大夾緊力 200N，最大保持力 300N
?平滑的夾緊特性。
工件厚度大至3.5mm時也能保持穩定的夾緊力輸出。
?單元化結構，減少了設計組裝工時。
夾緊缸上追加了臂組件和安裝組件。
| 系列 | 動作方式 | 臂開度 | 缸筒內徑（mm） |
|---|---|---|---|
| CKZM16-X2800 基本型 | 雙作用 | 68o | 16 |
| CKZM16-X2900 串聯型 | 雙作用 | 68o | 16 |
產品特點
Compact Width 20 mm (Base type, Tandem type)
Lightweight 250 g (Base type)
Maximum clamping force 200 N (Tandem type)
Maximum holding force 300 N (Base type, Tandem type)
Outputs constant clamping force for workpiece thickness up to 3.5 mm.*Figure 1
· Easy adjustment of clamping position during assembly
· When thickness of workpiece differs, adjustment is not required if within range.
Arm assembly and Mounting assembly added to clamp cylinder.
Basic mounting
Press the mounting bracket against surface A, and fix it with the work clamping base. Using a bolt to support the mounting bracket is recommended.
Non-rotating mounting
The work clamping base can be used as a parallel key to prevent rotation. Using a bolt to support the mounting bracket is recommended.
Magnetic field resistant auto switch：D-P3DWA□
Compact auto switch：D-M9□、D-A9□
Magnetic field resistant auto switch: D-P3DWA□
Fully closed structure prevents dust from entering easily.
Clamping of workpiec
Clamps edges of panels which do not require a long arm.
Gripper handling workpiece
