欧美激情国产精品,国产在AJ精品,亚洲精品不卡AV在线播放,国产99久久久久久免费看

Vacuum Equipment

Vacuum Equipment »  Vacuum Pads

Vacuum Pads

Vacuum Pads Vacuum Pads

Vacuum Pads

Basic Vacuum Pad (Vacuum Suction Cup) ZP

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?12 sizes, 6 types of pad forms
    　The mounting bracket can be selected according to the application.
    ?Pad form: Flat type, Flat type with ribs, Bellows type,
    　Thin flat type, Thin flat type with ribs, Deep type
    ?Mounting: Male thread, Female thread
    ?Vacuum inlet direction: Vertical, Lateral
    ?Vacuum inlet: Male thread, Female thread, One-touch fitting, Barb fitting
    ?Buffer: Without, With
    　[Buffer stroke [mm]: 6, 10, 15, 20, 25, 30, 40, 50]
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZPFlat typeφ2,φ4,φ6,φ8,φ10,φ13,φ16,
φ20,φ25,φ32,φ40,φ50
ZPFlat type with ribsφ10,φ13,φ16,φ20,φ25,φ32,φ40,φ50
ZPFlat type (Ball joint)φ10,φ13,φ16,φ20,φ25,φ32,φ40,φ50
ZPBellows typeφ6,φ8,φ10,φ13,φ16,
φ20,φ25,φ32,φ40,φ50
ZPThin flat typeφ10,φ13,φ16
ZPThin flat type with ribsφ10,φ13,φ16
ZPDeep typeφ10,φ13,φ16,φ20,φ25,φ32,φ40

Compact Vacuum Pad (Vacuum Suction Cup) ZP3

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?Overall length shortened
    ?Pad form: Flat type, Flat type with groove, Bellows type, Bellows type with ribs
    ?Mounting: Male thread, Female thread
    ?Vacuum inlet direction: Vertical, Lateral
    ?Vacuum inlet: Male thread, Female thread, One-touch fitting, Barb fitting
    ?Buffer: Without, With
    　[Buffer stroke [mm]: 3, 6, 10, 15, 20]
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP3Flat typeφ1.5,φ2,φ3.5
ZP3Flat type with grooveφ4,φ6,φ8,φ10,φ13,φ16
ZP3Bellows typeφ4,φ6,φ8
ZP3Bellows type with ribsφ10,φ13,φ16

Oval Vacuum Pad (Vacuum Suction Cup) ZP/ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?For rectangular, vertically long, and horizontally long workpieces
    ?Pad form: Oval flat type
    ?Mounting: Male thread, Female thread
    ?Vacuum inlet direction: Vertical, Lateral
    ?Vacuum inlet: Male thread, Female thread, One-touch fitting, Barb fitting
    ?Buffer: Without, With
    　Buffer stroke (mm): [ZP] 6, 10, 15, 20, 25
    　Buffer stroke (mm): [ZP2] 10, 20, 30, 40, 50
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZPOval flat type2×4, 3.5×7, 4×10
ZP2Oval flat type3.5×7,
4×10, 4×20, 4×30,
5×10, 5×20, 5×30,
6×10, 6×20, 6×30,
8×20, 8×30

High Rigidity Vacuum Pad (Vacuum Suction Cup) ZP3E

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?Stable suction position, Improved ease of removal
    ?Pad form: Flat type with groove, Bellows type with ribs and groove
    ?Mounting: Male thread, Female thread
    ?Vacuum inlet direction: Vertical, Lateral
    ?Vacuum inlet: Male thread, Female thread
    ?Buffer Without, With
    　[Buffer stroke [mm]: 10, 30, 50]
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP3EFlat type with grooveφ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3EFlat type with groove (Ball joint type)φ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3EBellows type with ribs and grooveφ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3EBellows type with ribs and groove (Ball joint)φ32,φ40,φ50,φ63,φ80,φ100,φ125

Mark-free Pad (Vacuum Suction Cup) ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?For use where adsorption marks must not be left on workpieces
    ?Pad which reduces the number of adsorption marks left on workpieces by the rubber
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP2Flat typeφ4,φ6,φ8,φ10,φ13,φ16,
φ20,φ25,φ32,φ40,φ50
ZP2High rigidity (Flat type with ribs)φ40,φ50,φ63,φ80,φ100,φ125
ZP2Resin attachmentApplicable pad: φ6,φ8,φ10,φ13,
φ16,φ20,φ25,φ32

Vacuum Pad ZP3C

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?Suitable for the adsorption transfer of corrugated cardboard, etc.,
    　requiring abrasion resistance
    ?Material: FS61 (Fluoro-based rubber) improves abrasion resistance
    　? More than twice the abrasion resistance of SMC’s urethane pads
    ?Easier maintenance
    　Compatible with 2 types of mounting tools
    ?Reduced suction of foreign matter due to mesh filter
    　Reduced suction of foreign matter into the vacuum pump and ejector
    　The pad and mesh filter can be replaced without tools.
    　The separation and disposal of the metal and rubber parts is possible.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP3CFlat type with ribφ20, φ25, φ32, φ40, φ50
ZP3CBellows typeφ20, φ25, φ32, φ40, φ50

Suction Cup/With Non-slip Feature ZP3M

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?An oval flat shape with non-slip feature has been added. [New]
    　Compatible with workpieces with an elongated adsorption surface
    ?Longer life (More than twice that of urethane cups)
    　Cup material: FS61 (Fluoro-based rubber) with excellent abrasion
    　resistance
    　Reduced number of cup replacements
    ?Non-slip special ribs
    　Diagonal ribs are radially arranged to secure the gripping force in all
    　directions.
    　· Prevents workpiece slippage
    　· Secure adsorbing and transferring are possible.
    ?Bowl shape with excellent flexibility
    　Curved workpieces can also be adsorbed.
    　The cup follows the workpiece shape, making stable adsorption possible.
    　Horizontal holding force: 387 N (Cup diameter ?100)
    　Suitable for high-temperature workpieces (200°C)
    ?Suitable for workpieces with oil film
    　As oil is ejected to the grooves between special ribs, the lateral slipping
    　of workpiece can be suppressed even on a steel plate with oil film.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesCup formCup diameter (mm)
ZP3M-RBowl shapeφ32, φ40, φ50, φ63, φ80, φ100
ZP3M-RBBowl Bellows Shapeφ32, φ40, φ50, φ63, φ80, φ100
ZP3M-TOval flat shape with non-slip feature16 x 50, 30 x 90, 40 x 80, 50 x 100

Vacuum Pad For Film Adsorption (Vacuum Suction Cup) ZP3P

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?Good for film packaging applications
    ?Uses a material compliant with a dissolution test of the FDA (U.S. Food
    　and Drug Administration) regulation 21CFR§177.2600 for “Rubber
    　articles intended for repeated use.”
    ?Blue colored pad
    ?Reduced leakage
    ?Reduction of wrinkles made on thin workpieces (film, vinyl, etc.) during
    　adsorption
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP3PFor film adsorptionφ20,φ25,φ35,φ50

Vacuum Pad/Bellows Type (Vacuum Suction Cup) ZP3P-JT

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?For the adsorption transfer of workpieces with flexible soft film
    　packaging
    ?Thin film skirt and special shaped ribs
    ?Flat attachment (2.5-stage)
    　For reducing wrinkles
    ?Guide attachment (5.5-stage)
    　Acceleration/deceleration: Adsorption transfer possible at 4G
    ?The pad and attachment are made of materials compliant with the FDA
    　 (U.S. Food and Drug Administration) dissolution test as well as Japan
    　Food Sanitation Act standards.
    ?Blue colored pad
    　Easy to distinguish the vacuum pad by color during contamination
    　inspection
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP3P-JTBellows (2.5-stage)φ20,φ25,φ32,φ40,φ50
ZP3P-JTBellows (5.5-stage)φ20,φ25,φ32,φ40,φ50

4.5-Stage Bellows Pad (Vacuum Suction Cup) ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?For use where there is no space for a buffer (spring type)
    ?For workpieces with inclined adsorption surfaces
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP2Bellows (4.5-stage)φ15,φ20,φ30,φ40,φ50
ZP2Bellows (2.5-stage/3.5-stage)φ6,φ9,φ10,φ14,φ15,φ16,φ25,φ30

Thin Flat/Flat Pad (Vacuum Suction Cup) ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?For the adsorption of flexible sheets or film
    ?Reduced deformation of flat surfaces during adsorption
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP2Thin flat type (With groove)φ10,φ15,φ20,φ30

Compact/Short-type/Nozzle Pad (Vacuum Suction Cup) ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP2Nozzle typeφ0.8,φ1.1

Sponge Pad (Vacuum Suction Cup) ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter(mm)
ZP2Spongeφ4,φ6,φ8,φ10,φ15

Special Configuration Pad (Vacuum Suction Cup) ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad typePad diameter(mm)
ZP2Vacuum pad for disk adsorption?

Vacuum Pad for Panel Holding ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?For the adsorption and holding of the stage of panels, glass circuit boards, etc.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad typePad diameter(mm)
ZP2Vacuum pad for panel holding?

Ball Spline Buffer Pad (Vacuum Suction Cup) ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad typePad diameter (mm)
ZP2Pad with ball spline bufferφ2，φ4，φ6，φ8

Vacuum Pad: Semiconductive Silicone Rubber ZP3-□HS□

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?Discharge static electricity gently. Prevent damage to electronic parts.
    ?Surface resistance: 106 to 109［Ω］
    ?Pad form: Flat type with groove
    ?Mounting: Male thread, Female thread
    ?Vacuum inlet direction: Vertical, Lateral
    ?Vacuum inlet: Female thread, One-touch fitting, Barb fitting
    ?Buffer: Without, With
    　[Buffer stroke [mm]: 3, 6, 10, 15, 20]
SeriesPad formPad diameter(mm)
ZP3-□HS□Flat type with grooveφ4,φ6,φ8,φ10,φ13,φ16

Vacuum Pad Made to Order ZP2

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
    ?Blast-type pad (Compact pad, Short-type pad)
    　Workpieces can be removed easily.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPad formPad diameter (mm)
ZP2Compact padφ3,φ4,φ5,φ6,φ7,φ8
ZP2Short-type padφ2,φ3,φ3.5,φ4,φ5,φ6,φ8,φ10,φ15
ZP2Thin flat padφ5,φ6,φ11,φ14,φ18,φ20
ZP2Bellows padφ2,φ4,φ5,φ6,φ8,φ10,φ15,φ20
ZP/ZP2High rigidity padφ32,φ40,φ50,φ63,φ80,φ100,φ125,
φ150,φ250,φ300,φ340, 30×50

Vacuum Pad with Ejector ZHP

Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Pads (Vacuum Suction Cups)
Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) ? Vacuum Ejectors
    ?Ejector and pad are integrated. Space saving with reduced piping labor!
    ?2-stage ejector
    　Suction flow rate increased by 50%, Air consumption reduced by 30%
    ?Easier maintenance
    　Mounting with the lock plate reduces the steps required for pad replacement!
    ?Pad diameter: ?63, ?80
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
  • Vacuum Pad with Ejector ZHP
    Manual
    Series View search result
    ZHPView search result
SeriesPad diameterPad formNozzle nominal size
ZHPφ63, φ80Bellows type with groove
Flat type with groove		φ0.7, φ1.0, φ1.2, φ1.5

Go Top