產品信息 ?
產品目錄
? 電動執行器/電缸
? 無桿型
無桿型
電動執行器/薄型無桿型 LEM
-
?薄型、低重心。
滑臺高度:28mm(LEMC/H/HT尺寸25的高度)。
?可與多種導軌組合。
?維護性好。
?電機安裝位置:可選擇上下、左右。
?可安裝用于限位確認或中間信號確認的無觸點磁性開關。
?控制性可選(控制器)。
像氣缸一樣點到點控制(可中間12點停止)
通過輸入數值簡單地實現位置設定。
?對應控制器/驅動器:JXC□LEC□
安全注意事項
電動執行器/共通注意事項
電動執行器/單獨注意事項
磁性開關/共通注意事項
磁性開關·磁性開關的安裝
特長
擴展品
簡易選型程序
特定開發品信息
環保認證(RoHS)
CE,UKCA/UL 對應表
系統構成圖
導向機構 | 系列 | 行程 (mm) | 可搬運重量 (kg) | 速度 (mm/s) | 絲杠 導程 (mm) |
---|---|---|---|---|---|
基本型 | LEMB | 50~2000 | 6,11 | 最大 1000 | 相當于48 |
凸輪隨動型 | LEMC | 50~2000 | 10,20 | 最大 1000 | 相當于48 |
單直線導軌型 | LEMH | 50~1500 | 10,20 | 最大 2000 | 相當于48 |
雙直線導軌型 | LEMHT | 100~1500 | 10,20 | 最大 2000 | 相當于48 |
產品特點
■Compact, Low Profile
Table height: 28mm
(For LEMC/H/HT, size 25)
Table height reduced by using belt drive and offset guide.
■Selectable controllability (Controller)
- End to end operation similar to an air cylinder (12 intermediate stop positions)
- Easy position setting using numerical inputs
- Mounting interchangeable with the conventional E-MY series
- Can be connected to various types of guide. (Series LEMB)
- Easy maintenance (Series LEMC/H/HT)
The drive unit and the guide unit are separable.
■Programless Type (With Stroke Study) Series LECP2
Stroke end operation similar to an air cylinder is possible.
■Programless Type Series LECP1
No Programming
Capable of setting up an electric actuator operation without using a PC or teaching box.
■Step Data Input Type Series LECP6
Simple Setting to Use Straight Away
●Easy Mode for Simple Setting
If you want to use it right away, select "Easy Mode."
●Normal Mode for Detailed Setting
Select normal mode when detailed setting is required.
- Step data can be set in detail.
- Signals and terminal status can be monitored.
- Parameters can be set.
- JOG and constant rate movement, return to origin, test operation and testing of forced output can be performed.