電子式壓力開關/壓力傳感器(傳感器、放大器一體型)
3色顯示 數字式位置傳感器 ISA3
-
?工件位置狀態一目了然。
?檢測面與工件的間隙量更直觀。
?設定簡單：可邊觀察顯示值邊進行設定。
?節能：空氣消耗量削減60%。
?耐冷凝水能力提高：10倍以上。
壓力開關擴展品/應用 用語集/技術解說 特定開發品信息 環保認證(RoHS)
| 系列 | 額定距離范圍 | 配管規格 供給側 | 配管規格 檢測側 |
|---|---|---|---|
| ISA3-F | 0.01～0.03mm | Rc, G 1/8 | φ4, φ6快換接頭, G 1/8 |
| ISA3-G | 0.02～0.15mm | Rc, G 1/8 | φ4, φ6快換接頭, G 1/8 |
| ISA3-H | 0.05～0.30mm | Rc, G 1/8 | φ4, φ6快換接頭, G 1/8 |
產品特點
Check at a glance if the workpiece is placed or not.
The clearance distance between the detection surface and the workpiece can be found intuitively.
A simple operation to enter the switch point value
(point at which the clearance reaches the switch point value)
The sub screen display can be selected from 6 display options
Easier maintenance
Measures against drainage
Drainage resistance:10 times or more
* Based on the SMC’s specific testing condition (oil proof test).
* Compared with the ISA2.
Withstand pressure expanded
Max.:600 kPa（3 times* compared with the ISA2）
* Compared with the ISA2 with 0.2 MPa pressure gauge.
High pressure flushing is possible.
* The switch output will be OFF during flushing.
Confirmation of the datum level for press fitting of a shaft
Confirmation of close contact with the datum level for machining
Confirmation of close contact with the workpiece for machining
Display OFF mode
Display OFF mode can be selected. The display can be turned OFF to reduce power consumption.
Display color
The color of the main display can be set to change depending upon the output activity. The display color change makes visual identification of the output ON/OFF easier.
Unit conversion
The pressure unit displayed on the sub screen can be changed.
Security code
By activating the security code, the key lock cannot be released without entering a security code.
Displayed value compensation
The displayed value can be corrected within ±20% R.D. of the displayed value at the time of shipment.
Forced output
The output can be fixed to an on/off state when starting the system or during maintenance. This enables confirmation of the wiring and prevents system errors due to unexpected output.
Zero-clear of pressure display
The pressure value displayed on the sub screen can be cleared to zero.
