特殊吸盤
非接觸式吸盤 XT661
-
?實現工件的非接觸搬運。
?可吸附工件的距離為：10mm
?有2種形式可選
旋風型：高提升力：最大44Ｎ
伯努利型：夾持時的工件振幅：±0.01mm以下
產品特點
■Max workpiece suction distance:10 mm
Original groove-channel design allows cyclone effect with
large suction area and even pressure dispersion!
?High lifting force: Max. 44 N （Outer body diameter: ?100）
?Totaled 5 size: ?20/?40/?60/?80/?100
?Working Principle
Air is discharged in the whirling direction.
?Various workpiece suction methods are available.
?Grease-free
?Can be disassembled and cleaned the inside.
?Made to Order
With urethane pad* (-X207)
* Except ?20
?Mitigation of impacts and prevention of damage during lifting
?No need to install a guide
With multi-port (-X211)
The presence of a workpiece can be
checked by installing a sensor.
Thickness: 1.8 mm Weight: Approx. 1.3 g*
* Outer body diameter: ?20
?Can be mounted on the end of the robot arm.
?Two sizes (?20 and ?25) are available.
Original groove-channel design allows the Bernoulli effect with suppressing the amplitude of the workpiece during gripping!
Amplitude of the workpiece during gripping: ±0.01 mm*or less
* Solar battery silicon cell(□125 mm, t = 250 μm)
* In SMC conditions
Size：□120
Size：?100
How to calculate
Working Principle
Air is discharged radially.
Various workpiece suction methods are available.
?Reduction of rotation load * No directionality of whirlwind air
?Standardization of multi-port* * Except ?40
?Grease-free
?Can be disassembled and cleaned the inside.
